Call 08048552916 85% Response Rate

Send Email

Insulation Monitoring Solutions

We are a leading Wholesale Trader of eds 3090 portable ground fault locator, insulation tester, online insulation fault monitoring system, neutral grounding resistance monitoring system, micro ohm meter and sonel mic-10s1 10 kv insulation resistance tester from Mumbai, India.
EDS 3090 Portable Ground Fault Locator
  • EDS 3090 Portable Ground Fault Locator
  • EDS 3090 Portable Ground Fault Locator

EDS 3090 Portable Ground Fault Locator

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Unit
Battery Capacity10-12 Hrs
Battery Life10 - 12 hours
Dimensions360 x 260 x 135 mm
Model Name/NumberEDS 3090
Weight7 Kg
Output Current Limitation5 mA or Unlimited (Max 25 mA)
Current Detect SensitivityAC/DC Circuit Greater than or equal to 0.5 mA
Quick Search Clamp55 mm (diameter),60 mm (jaw opening)
Jaw Opening60 mm (2.36 in)
Operating Environment-5 to 40 Deg.C
Power Requirements8.4 VDC Li-ion Battery
Nominal Fequency42-460 Hz
The EDS 3090 EDS Portable Ground Fault Locator(DC Leakage detector) is an essential instrument to identify faulty grounding where electrical cables have breakage and loss to the ground. The unit identifies the inadvertent ground by injecting a low frequency signal on the faulted polarity. By following the signal using the current clamps and the portable receiver, the physical location of the ground fault can be found. Measurement of online DC systems is possible as the output current of theEDS 3090 EDS is very low but the output voltage can be up to 1000V.

The EDS 3090 EDS battery ground detector provides accurate solutions for troubleshooting and preventative maintenance, increasing the reliability of electrical equipment. Fast localization and elimination of grounding faults is critical for electricians and service technicians whose goal is to increase system reliability.

  • Patented technology, pinpoint current leakage fault with grounding resistance lower than 1MΩ
  • Locate faults for both offline and online DC systems
  • Waveform analysis will analyze the interference signal in the circuit
  • Wide output voltage and output frequency ranges allow the EDS 3090 EDS to meet the needs of your electronic equipment

Kit Includes:
  • EDS 3090 EDS Signal Generator
  • Power Adapter
  • Qty. (2) Signal Testing Leads
  • Qty. (2) Alligator Clips
  • Punctuation Clip
  • Signal Receiver
  • Qty. (2) Dual-Range Current Detector
  • Qty. (2) Batteries
  • 120/220 50/60 Hz Battery Charger
  • Carrying Case

  • Portable insulation fault location systems for IT systems AC 0...790 V, 42...460 Hz/DC 0...960 V or de-energised systems
  • Residual current measurement in TN/TT systems
  • Use in main and control circuits,  photovoltaic systems
  • Measuring clamps 20/52 mm  (115 mm optional)
  • Robust aluminium case, convenient to carry
  • Locating current injectors PGH18... with variable locating current 1...25 mA
  • Integrated locating voltage for de-ener-gised systems (PGH186)
Get Best QuoteRequest Callback
Insulation Tester
  • Insulation Tester
  • Insulation Tester

Insulation Tester

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Unit
Packaging TypeBox
Display TypeLCD Segment Display
Usage/ApplicationInsulation Resistance Testing
Model Name/NumberMIC 5001
Weight0.9 Kg
Size/Dimension200 x 180 x 77 mm
Ip RatingIP65
Power SupplyNiMH 9.6 V - 2 Ah battery pack and power supply 12 V

Insulation resistance measurement in a compact, light-weight, low-cost design.

  • Measurement to 5 T
  • Measuring voltage selectable from 50 V to 500 V range in 50 V steps, and from 500 V to 5000 V range in 100 V steps
  • Continuous indication of insulation resistance or leakage current
  • Automatic discharge of stored charge due to capacitance of tested object after the insulation resistance measurement
  • Audio beeps every five seconds to alert user test is proceeding, and to get time characteristics
  • Measured test times of T1, T2 and T3 for measuring Absorption Coefficient, Dielectric Absorption Ratio DAR. and Polarization Index PI
  • Continuous display of test voltage during the measurement
  • Protection against measuring live objects
  • Two and three-lead measurement method
  • Ramp Test Insulation resistance measurement
  • Measurement of breakdown voltage with increments up to 1 kV / s
  • Measurement of alternating and direct voltages from 0 V to 750 V
  • 990 cells of memory (11880 records) to record results
  • Data transfer to PC via USB cable
  • Built-in rechargeable battery pack
  • Meets the requirements of the EN 61557 standard
  • Charge from optional car lighter (12 V) socket accessory

Other technical specifications::

  • Power supply of the meter NiMH 9.6 V - 2 Ah battery pack and power supply 12 V
  • Weight of the meter approx. 0.9 kg, 2 lbs
  • Memory for measurement results: 990 cells, 11880 records
  • Transfer of measurement results data via USB

Additional Information:

  • Delivery Time: 3-4 weeks
Get Best QuoteRequest Callback
Online Insulation fault Monitoring System

Online Insulation fault Monitoring System

Get Latest Price

Product Brochure

Product Details:
Frequency50/60 Hz
Power SourceElectric
Voltage300 V
PhaseSingle Phase

Online Insulation Fault monitoring system for ungrounded AC,DC and AC-DC mix Power supply is a patented tecnology which works on adaptive measuring pulse(AMP pulse). It is also called as Online DC Earth fault monitoring system with which symetrical high ohmic and multiple faults can be pinpointed.


  • On-line insulation monitoring of AC/DC system up to 12KV.
  • Automatic insulation fault location during operation-Without Disconnection
  • Central administration via LAN/VAN
  • Two separately adjustable response value
  • Response range 1K Ω to 10M Ω
  • RS-485 interface. Data memory
  • Can be extended to an insulation fault
  • location system for max.1080 circuits at a time
Get Best QuoteRequest Callback
Neutral Grounding Resistance Monitoring System
  • Neutral Grounding Resistance Monitoring System
  • Neutral Grounding Resistance Monitoring System

Neutral Grounding Resistance Monitoring System

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity1 Unit
Usage/ApplicationElectrical Industry
VoltageAC 24-240 V
Model Name/NumberNGRM700
Frequency40-70 Hz
IP RatingIP65
  • Comprehensively configurable
  • Designed for easy retrofit
  • Multilingual user interface

Can operate on systems 5000 m above sea level without derating

The NGRM700 is an advanced device that allows continuous NGR monitoring to provide all necessary information of the system grounding.

The NGRM700 monitors the resistance value of the Neutral Grounding Resistor (NGR) and the fault current flowing through the NGR in High Resistance Grounded (HRG) systems. The ideal relay to protect HRG systems and to provide a comprehensive overview. The relay can be connected to the supervision system or directly to the communication network.

Get Best QuoteRequest Callback
Micro Ohm Meter
  • Micro Ohm Meter
  • Micro Ohm Meter

Micro Ohm Meter

Get Latest Price

Product Brochure

Product Details:
Model Name/NumberMMR-640
Usage/ApplicationInsulation Resistance
WeightApprox 3.5 Kg
Dimensions318 x 257 x 152 mm
Accuracy+/-(0.25% w.m. + 2 digts)
Frequency50-60 Hz
Measuring Frequency0-10 ohms
Range1999.9 Omega
Voltage90-265 V
Current2 A
Operating Temperature-10 D C to 50 D C
Reference Humidity40-60 %

The MMR-640 meter is designed to measure very low resistance of resistive objects. This product is made to be used in
power plants, railways and maintenance companies to measure resistance of:

  • breakers, contacts,
  • earthing conductors, equipotential bondings,
  • welded and soldered connections,
  • bolted connections,
  • and other resistive objects.

MMR-640 can be also utilized on production lines (eg. at the final production control stage).

Product features

  • measurement of very low resistance
  • high immunity to disturbances
  • easy operation
  • big touchscreen
  • automatic measurement mode
  • autoranging
Get Best QuoteRequest Callback
SONEL MIC-10s1 10 kV Insulation Resistance Tester
  • SONEL MIC-10s1 10 kV Insulation Resistance Tester
  • SONEL MIC-10s1 10 kV Insulation Resistance Tester

SONEL MIC-10s1 10 kV Insulation Resistance Tester

Get Latest Price

Product Brochure

Product Details:
Display5.6 Inch LCD Graphic-type
Model Name/NumberMIC-10s1
Weight14.5 lbs / 7 kg
Test Current1.2 mA,3 mA and 5 mA
Operating Temperature-4 D F to 122 D F / -20 D C to + 50 D C
Adjustable Measuring Time99'59 Inch
Size15.4 x 12.2 x 6.8 in / 390 x 310 x 180 mm
Storage Temperature-13 D F to 158 D F / -25 D C to + 70 D C
Humidity20% to 80% (non-condensing)
Open Case RatingIP 40 / NEMA 2
Closed Case RatingIP 67 / NEMA 6
Internal Memory Storage10,000 Records
Communications InterfaceUSB,Bluetooth


  • Measurements to 40 TΩ
  • Test voltage selectable from 50 to 1,000 V in 10 V steps, and from 1,000 to 10,000 V in 25 V steps
  • Indication of test voltage during measurement
  • Continuous indication of measured insulation resistance or leakage current
  • Selectable test current at 1.2 mA, 3 mA, and 5 mA
  • Audio beeps at 5 second intervals to time the testing process
  • Measuring time selectable up to 99 minutes 59 seconds
  • User-selection of 3 test time intervals (T1, T2, T3 ) from 1 to 600 seconds for each interval for measuring up to 2 Absorption Coeffi cients
  • Measurement of Polarization Index, Dielectric Absorption Ratio, Capacitance, and Dielectric Discharge
  • Stepped voltage mode or continuous measurement mode
  • 2 lead or 3 lead measurement methods
  • Location of distance to insulation damage
  • Automatic measurement of multiple core cables (with the additional AutoISO-5000 adapter, max. voltage 5 kV)
  • Temperature measurement with optional probe



  • Automatic discharge of measured object capacitance voltage after completion of
  • resistance measurement
  • Protection against measuring live objects
  • CAT III 1000 V / CAT IV 600V rated


A Complete Field Tool:

  • Portable rugged case rated to IP 67 / NEMA 6 for outdoor use
  • 10 ft long test leads and all test clips provided
  • Easy to use, clearly-labeled panel buttons
  • Backlit graphic display and keyboard
  • Wide operating temperature range: -4 °F to 122 °F / -20°C to + 50 °C


Syetem Smarts:

  • LCD Display graphically plots progress of measurements
  • Annotation menu to add text notes on tests, describe location, conditions etc.
  • Internal memory stores 10,000 records
  • USB or Bluetooth connection to PC
  • Battery or power supply operation
  • Fast-charger for battery
  • Digital filters for high noise immunity in induced environments up to 500 V


Get Best QuoteRequest Callback


Looking For "Insulation Monitoring Solutions"?
Thank youYour Enquiry has been sent successfully.
© Om Technical Solutions. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.