- Home
- »
- Our Products
- »
- Cable and Pipe Locator
Cable and Pipe Locator
RD8100 Cable and Pipe Locator
Product Brochure
Model Name/Number | RD8100 |
Brand | Radiodetection |
Battery Life | 30 Working Hours |
Depth Measurement Accuracy | 0.5 meters |
Depth Range | 12 Meter |
Height | Approx 2 Feet |
Length | 9 Inch |
Power Source | Batteries |
Sensitivity | 6E-15 Tesla, 5 microampere at 1 meter (33kHz) |
Usage Logging Memory | 4 GB |
Usage Logging Capacity | Over 500 days,measured at 8 hours use per day |
Weight | 1.8 kg |
Mains Charger | 100-250 Volts AC,50/60 Hz |
Automotive Charger | 12-24V DC |
IP Rating | IP65 |
Operating Temperature | -20 to 50 Deg C |
Unit Dimensions | 648mm x 286mm x 125 mm |
Selectivity | 120dB/Hz |
Depth Measurement Precision | +/-3% |
RD8100 Cable And Pipe Locator range has several groundbreaking features that deliver accurate, reliable and repeatable performance. Locating specific pipes, cables and utility RF markers in large underground networks is very complex. Ground distortion effects, caused by differing soil types and proximity to other conductors, make the user’s job more difficult and time-consuming. The most important requirements for a locator under these circumstances are ease of use, accuracy and reliability. RD8100 Cable And Pipe Locator range addresses these needs with many features that deliver accurate, reliable and repeatable performance. The new RD8100 Cable And Pipe Locator - denoted ‘M’ add RF marker locating to the range, with automatic cable marker depth estimation and Bluetooth connectivity as standard.
RF utility marker locator with automatic depth estimation:
- Compass
- Proportional Left–Right Arrows
- Dynamic Overload Protection
- Bluetooth® Connectivity (marker models)
- Automatic data logging and CALSafe (PLM and TLM models)
- Transmitters
- Remote Calibration
- Supporting Software
- Years extended warranty
- Rechargeable battery packs for Locators and Transmitters.
Underground Pipe And Cable Locator
Product Brochure
Minimum Order Quantity | 1 Unit |
Alarm Mode | Sound |
Usage/Application | For detecting metallic utilities before excavation |
Brand | Radio Detection |
Model Name/Number | Cable Locator |
Power Source | Battery Powered |
Operating Temperature Range | -20 to +50 Deg C |
Environmental Protection | IP54 |
Induction Mode Signal Characteristic | 33 kHz |
Batteries | 6 x LR20 (D) 1.5V alkaline |
The new C.A.T4 digital platform delivers highly refined locate capabilities, specifically designed to help the operator find more buried utilities. The C.A.T4 Avoidance Mode lets the operator check an intended excavation area for Power, Radio and Genny signals, and pinpoint located utilities in a single scan. Features such as the bar graph tidemark enable an operator to quickly spot a peak response and zero-in on a buried conductor.
The new Genny4 Signal Generator, with a new integrated logic design, provides a class-first simultaneous dual-frequency signal output design. Alongside the familiar 33kHz locate signal for general purpose locates, the Genny4 transmits a second frequency designed to facilitate location of small diameter cables such as telecoms and street lighting, including spurs. For tricky locates, the new power boost function enables the locate signal to travel further and deeper, and couple onto utilities more easily.
The C.A.T4 guides users towards better and safer working practices through its optional SWING Rate detector and Service Due date warning.
C.A.T4 is a safety-critical precision instrument and the optional 30-day countdown to the Service Due date, CALSafe and innovative eCert on-line system calibration validation capabilities are designed to reinforce company and recommended service policies. This is a equipment which works as a cable avoidance tool and as a signal generator, cable locator & survey tool.