- Home
- ยป
- Our Products
- »
- Electrical Safety Equipments
Electrical Safety Equipments
Wholesale Trader of a wide range of products which include earth resistance tester, cable cutting tools, ekm 60/22 battery powered hydraulic crimping tool, ahp 700-l conductor crimping & cutting tools and fipress- fire prevention system.
Earth Resistance Tester
Price on Request
Product Brochure
Product Details:
Minimum Order Quantity | 1 Unit |
Model Name/Number | MRU-200-GPS |
Usage/Application | Earth Testing |
Brand | Sonel |
Display | LCD |
Measuring Frequency | 15-450 Hz |
Storage Humidity | 20-90 % |
Humidity | 20 to 80% |
Protection | IP 54 |
Operation Temperature | -10 to +50 Deg C |
Storage Temperature | -20 to +70 Deg C |
The Mru-200-Gps Offers A Variety Of Measurement Methods For Ground Resistance And Resistiviy
The MRU-200-GPS is the only meter which can perform all ground resistance measurement methods; 2-pole, 3-pole, 4-pole, and impulse earth impedance methods.
- Ground resistance using auxiliary electrodes, or with electrodes and clamp for measurements in the presence of multiple ground paths
- Ground resistance using double clamps when it is not possible to use auxiliary electrodes
- Impulse ground resistance without disconnecting measured grounding
- Soil resistivity using Wenner method
- Leakage current using current clamp or flexible Rogowsky probe
- Measurement of continuity of equipotential bonding and protective conductors (meets IEC 60364-6-61:2000 section 6.12.2) with auto-zero function and 200 mA current
Key Features:
- Ground resistance measurement, with 2-pole, 3-pole, or 4-pole methods
- Leakage current measurement
- Selective measurement with clamp excludes influence from parallel ground points
- No opening of rusted conductors needed
- Impulse ground resistance measurement at 4/10 s, 8/20 s, or 10/350 s
- Two clamps resistance measurement method without auxiliary test probes
- GPS coordinates of measurement location are stored with test results
Other Functions & Features:
- Resistance measurement of auxiliary electrodes
- Measurement of interference voltage and interference frequency
- Measurement in the presence of interference voltages at 162/3 Hz, 50 Hz, 60 Hz, and 400 Hz
- Automatic or manual selection of frequency of measuring signal
- Selection of maximum measuring voltage (25 V and 50 V)
- Distance between the electrodes noted in meters (m) and feet (ft)
- Memory storage for 990 measurements
- Calibration information of test clamp(s)
- Real-time clock
- USB interface for PC connection
- Internal battery with indication of state of charge
- Backlit LCD graphic display
Get Best Quote
Request Callback
Cable Cutting Tools
Price on Request
Product Brochure
Product Details:
Model Name/Number | ESG 55-L |
Brand | Klauke |
Usage/Application | Cable Cutting |
Material | Alloy |
Weight | 8.0 Kg (Including Battery) |
Cutting Range | Max 55 M Diameter |
Cutting Force | 120 KN |
Cutting Time | 10-19 Seconds |
Battery Voltage | 18 V |
Battery Capacity | 3.0 Ah,Li-Ion |
Ambient Temperature | -12 D C to +40 D C |
- Also suitable for round material made of Al, Cu and steel
- 120 kN cutting force for maximum output
- Saves time with multiple cuts thanks to innovative opening mechanism
- All tool data in view thanks to display and i-press® app
Characteristics:
- Choose your battery system: Bosch or Makita
- All data can be easily read via Bluetooth
- Closed head with bolt interlock, rotatable, flip top style
- Simple and safe: One-button operating concept for controlling all tool functions
- Effortless working due to balanced centre of gravity
- LED for work area illumination
- 2-stage hydraulic system with fast feed and power stroke
- Simple and safe: Automatic retraction when operation is complete
- Manual retract stop (MRS) for efficient operations
- Always ready-to-use thanks to battery charge and service display
- Electronic control and monitoring of cutting operation
- Balanced centre of gravity for easy handling
- High-performance motors for maximum operating speed
Suitable for:
- Armoured Cu and Al cables, Al/St wires
Get Best Quote
Request Callback
EKM 60/22 Battery Powered Hydraulic Crimping Tool
Price on Request
Product Brochure
Product Details:
Part Number | EKM6022CFB |
Usage/Application | Cable Crimping |
Crimping Capacity | up to 630 mm2 |
Overall Length | 12 Inch |
Capacity | Crimping Force of 13.5 Ton |
Brand | Klauke |
Model Name/Number | EKM 60/22 |
Weight | 3.0 Kg |
Crimping Range | 6 - 300 mm2 |
Crimping Cycle | 2 s (for ARS) to 5 s (depending on crosssection) |
Battery Voltage | 18 V |
Battery Capacity | 2.0 Ah,Li-Ion |
Charging Time | 15 Minute |
Ambient Temperature | -10 D C to + 40 D C |
- Large crimping range up to 300 mm²
- All tool data in view thanks to display and i-press® app
Characteristics:
- Choose your battery system: Bosch or Makita
- All data can be easily read via Bluetooth
- Closed head with bolt interlock, rotatable, flip top style
- Quality assurance via visual and audible signals in case of error
- Simple and safe: One-button operating concept for controlling all tool functions
- Effortless working due to balanced centre of gravity
- LED for work area illumination
- Simple and safe: Automatic retraction when operation is complete
- Automatic retract stop (ARS) for positioning control in case of multiple crimps
- Always ready-to-use thanks to battery charge and service display
Suitable for:22-series interchangeable crimping dies, narrow crimping
Get Best Quote
Request Callback
AHP 700-L Conductor Crimping & Cutting Tools
Price on Request
Product Brochure
Product Details:
Brand | Klauke |
Usage/Application | Crimping & Cutting for Overhead Line |
Overall Length | 12 Inch |
Model Name/Number | AHP 700 L |
Dimension | 330 x 160 x 280 mm |
Operating Pressure | Max 700 Bar |
Oil Volume | Approx 800 ml |
Flow Rate Low Pressure Range | Up to 0.9 l/min |
Battery Voltage | 18 V |
Battery Capacity | 3.0 Ah,Li-Ion |
Charging Time | 22 Minutes |
Weight With Two Batteries | Approx 6.4 Kg |
Protection | IP43 |
Ambient Temperature | -15 D C to +40 D C |
Intelligent Pressing System.If a deviation from the set operation pressure is identified, an acoustic signal sounds and a red LED flashes.
Characteristics
- Select programme from crimping, cutting, and punching
- Housing from impact-resistant, fibreglass reinforced polyamide
- Large display for monitoring, diagnostics and setting the pump
- Two powerful, high-capacity Li-Ion batteries
- Simple and safe: Automatic retraction when operation is complete
- Manual retract stop with "teach-in" (MRS+) for positioning control for multiple crimps
- Remote control with cable for easy operation of the battery-operated pump
- Maintenance display via LED
- All hydraulic hoses have coupling plug and coupling sleeve, oil filled
- High wearing comfort with padded shoulder strap
- Operates all single-acting Klauke crimping, cutting and punching tools with 700 bar operating pressure
- The connection to busbar machining centre
- The punching of busbars in conjunction with the LSK 120 with adapter CMGSK
Get Best Quote
Request Callback
FIPRESS- Fire Prevention System
Price on Request
Product Brochure
Product Details:
Operating Temperature Range | 70-110 Degree celsius |
Operation Temperature Range | 70-110 Degree Celsius |
Ip Rating | IP 30 |
Operating Temperature | 70,90,110 Degree Celsius |
Storage Temperature | -10 to 55 |
Get Best Quote
Request Callback